From 241536a6e9ef36c32e83627096bb7265ced51153 Mon Sep 17 00:00:00 2001
From: Imbus <>
Date: Sat, 23 Mar 2024 21:27:59 +0100
Subject: [PATCH] Includes in main

---
 main.c | 69 +++-------------------------------------------------------
 1 file changed, 3 insertions(+), 66 deletions(-)

diff --git a/main.c b/main.c
index 07501f4..1808f57 100644
--- a/main.c
+++ b/main.c
@@ -12,73 +12,10 @@
 #define LED_PIN PB5  // Define the pin connected to the LED
 #define TEMP_SENSOR_ADDR 0x48
 #define TEMP_REG_ADDR 0x00
-#define BAUD 9600  // 9600 seems to be the highest the ATmega328P can handle in this config
 
-void initI2C() {
-    // Set the prescaler to 1
-    TWSR &= ~(1 << TWPS0);
-    TWSR &= ~(1 << TWPS1);
-    // Set the bit rate to 100kHz
-    TWBR = ((F_CPU / 100000) - 16) / 2;
-}
-
-void I2C_start() {
-    // Send the start condition
-    TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
-    // Wait for the start condition to be sent
-    while (!(TWCR & (1 << TWINT)))
-        ;
-}
-
-void I2C_stop() {
-    // Send the stop condition
-    TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
-    // Wait for the stop condition to be sent
-    while (TWCR & (1 << TWSTO));
-}
-
-void I2C_write(uint8_t data) {
-    // Load the data into the data register
-    TWDR = data;
-    // Start transmission of data
-    TWCR = (1 << TWINT) | (1 << TWEN);
-    // Wait for the data to be sent
-    while (!(TWCR & (1 << TWINT)));
-}
-
-uint8_t I2C_read(uint8_t ack) {
-    // Enable TWI, generate ACK (if ack = 1) and clear TWI interrupt flag
-    TWCR = (1 << TWINT) | (1 << TWEN) | (ack << TWEA);
-    // Wait until TWI finish its current job (read operation)
-    while (!(TWCR & (1 << TWINT)));
-    // Return received data
-    return TWDR;
-}
-
-void initUART() {
-    // Set baud rate
-    UBRR0H = (uint8_t)(F_CPU / (BAUD * 16UL) - 1) >> 8;
-    UBRR0L = (uint8_t)(F_CPU / (BAUD * 16UL) - 1);
-    // Enable receiver and transmitter
-    UCSR0B |= (1 << RXEN0) | (1 << TXEN0);
-    // Set frame format: 8 data, 1 stop bit
-    UCSR0C |= (1 << UCSZ01) | (1 << UCSZ00);
-}
-
-void UART_transmit(uint8_t data) {
-    // Wait for empty transmit buffer
-    while (!(UCSR0A & (1 << UDRE0)));
-    // Put data into buffer, sends the data
-    UDR0 = data;
-}
-
-void UART_println(const char *str) {
-    // Transmit each character until NULL character is encountered
-    while (*str) UART_transmit(*str++);
-    // Transmit carriage return and line feed characters
-    UART_transmit('\r');
-    UART_transmit('\n');
-}
+#include "MPU6050.h"
+#include "i2c.h"
+#include "uart.h"
 
 float readTemperature() {
     uint16_t temperature;