Reformat leftovers

grbl/eeprom.c

@@ -49,9 +49,9 @@
 unsigned char eeprom_get_char(unsigned int addr) {
     do {
     } while (EECR & (1 << EEPE)); // Wait for completion of previous write.
-    EEAR = addr;                  // Set EEPROM address register.
-    EECR = (1 << EERE);           // Start EEPROM read operation.
-    return EEDR;                  // Return the byte read from EEPROM.
+    EEAR = addr;        // Set EEPROM address register.
+    EECR = (1 << EERE); // Start EEPROM read operation.
+    return EEDR;        // Return the byte read from EEPROM.
 }
 
 /*! \brief  Write byte to EEPROM.

grbl/gcode.c

@@ -208,7 +208,7 @@ uint8_t gc_execute_line(char *line) {
                     word_bit = MODAL_GROUP_G4;
                     if ((mantissa != 10) || (int_value == 90)) {
                         FAIL(STATUS_GCODE_UNSUPPORTED_COMMAND);
-                    }             // [G90.1 not supported]
+                    } // [G90.1 not supported]
                     mantissa = 0; // Set to zero to indicate valid non-integer G command.
                                   // Otherwise, arc IJK incremental mode is default. G91.1 does nothing.
                 }
@@ -245,7 +245,7 @@ uint8_t gc_execute_line(char *line) {
                     gc_block.modal.tool_length = TOOL_LENGTH_OFFSET_ENABLE_DYNAMIC;
                 } else {
                     FAIL(STATUS_GCODE_UNSUPPORTED_COMMAND);
-                }             // [Unsupported G43.x command]
+                } // [Unsupported G43.x command]
                 mantissa = 0; // Set to zero to indicate valid non-integer G command.
                 break;
             case 54:
@@ -654,7 +654,7 @@ uint8_t gc_execute_line(char *line) {
         }; // [No axis words]
         if (bit_isfalse(value_words, ((1 << WORD_P) | (1 << WORD_L)))) {
             FAIL(STATUS_GCODE_VALUE_WORD_MISSING);
-        }                                        // [P/L word missing]
+        } // [P/L word missing]
         coord_select = trunc(gc_block.values.p); // Convert p value to int.
         if (coord_select > N_COORDINATE_SYSTEM) {
             FAIL(STATUS_GCODE_UNSUPPORTED_COORD_SYS);

grbl/protocol.c

@@ -694,7 +694,7 @@ static void protocol_exec_rt_suspend() {
                         st_go_idle();                            // Disable steppers
                         while (!(sys.abort)) {
                             protocol_exec_rt_system();
-                        }       // Do nothing until reset.
+                        } // Do nothing until reset.
                         return; // Abort received. Return to re-initialize.
                     }
 

grbl/system.c

@@ -200,7 +200,7 @@ uint8_t system_execute_line(char *line) {
             }
             if (system_check_safety_door_ajar()) {
                 return (STATUS_CHECK_DOOR);
-            }                         // Block if safety door is ajar.
+            } // Block if safety door is ajar.
             sys.state = STATE_HOMING; // Set system state variable
             if (line[2] == 0) {
                 mc_homing_cycle(HOMING_CYCLE_ALL);
@@ -279,7 +279,7 @@ uint8_t system_execute_line(char *line) {
             } else { // Store startup line [IDLE Only] Prevents motion during ALARM.
                 if (sys.state != STATE_IDLE) {
                     return (STATUS_IDLE_ERROR);
-                }                  // Store only when idle.
+                } // Store only when idle.
                 helper_var = true; // Set helper_var to flag storing method.
                                    // No break. Continues into default: to read remaining command characters.
             }