v1.1c: New sleep mode. Laser mode and other bug fixes.

- New $SLP sleep mode that will disable spindle, coolant, and stepper
enable pins. Allows users to disable their steppers without having to
alter their settings. A reset is required to exit and re-initializes in
alarm state.

- Laser mode wasn’t updating the spindle PWM correctly (effected
spindle speed overrides) and not checking for modal states either.
Fixed both issues.

- While in laser mode, parking motions are ignored, since the power off
delay with the retract motion would burn the material. It will just
turn off and not move. A restore immediately powers up and resumes. No
delays.

- Changing rpm max and min settings did not update the spindle PWM
calculations. Now fixed.

- Increased default planner buffer from 16 to 17 block. It seems to be
stable, but need to monitor this carefully.

- Removed software debounce routine for limit pins. Obsolete.

- Fixed a couple parking motion bugs. One related to restoring
incorrectly and the other the parking rate wasn’t compatible with the
planner structs.

- Fixed a bug caused by refactoring the critical alarms in a recent
push. Soft limits weren’t invoking a critical alarm.

- Updated the documentation with the new sleep feature and added some
more details to the change summary.

README.md

@@ -40,6 +40,8 @@ Grbl includes full acceleration management with look ahead. That means the contr
 
 - **Laser Mode** : The new "laser" mode will cause Grbl to move continuously through consecutive G1, G2, and G3 commands with spindle speed changes. When "laser" mode is disabled, Grbl will instead come to a stop to ensure a spindle comes up to speed properly. Spindle speed overrides also work with laser mode so you can tweak the laser power, if you need to during the job. Switch between "laser" mode and "normal" mode via a `$` setting.
 
+- **Sleep Mode** : Grbl may now be put to "sleep" via a `$SLP` command. This will disable everything, including the stepper drivers. Nice to have when you are leaving your machine unattended and want to power down everything automatically. Only a reset exits the sleep state.
+
 - **Significant Interface Improvements**: Just this one time and done simultaneously with adding override data and controls, Grbl has tweaked the communication interface to make it easier for developers to write and maintain their GUIs. _NOTE: GUIs need to specifically update their code to be compatible with v1.1 and later._
 
 	- **New Status Reports**: To account for the additional override data, status reports have been tweaked to cram more data into it, while still being smaller than before. Documentation is included, outlining how it has been changed.