d21e06a201
- Increment to v1.1b due to status report tweak. - Tweaked the buffer state status reports to show bytes and blocks available, rather than in use. This does not require knowing the buffer sizes beforehand. It’s implicit. - Also, since buffer states are not used by most devs (after inquiries), it is no longer enabled by default and a status mask option was added for this. - Fixed some typos and updated for the report tweak in the documentation. - Wrote a joystick implementation concept in the jogging markdown document. Outlines how to get a low-latency feel to a joystick (and other input devices). - Removed XON/XOFF support. It’s not used by anyone because of its inherent problems. Remains in older versions for reference. - Added a compile option on how to handle the probe position during a check mode. - Fixed a jogging bug. If G93 is the modal state before a jogging motion, the feed rate did not get calculated correctly. Fixed the issue. - Refactored some code to save another 160+ bytes. Included an improved float vector comparison macro and reducing a few large and repetitive function calls. - Fixed a probing bug (existing in v0.9 too) where the target positions were not set correct and error handling was improper.
64 lines
1.6 KiB
C
64 lines
1.6 KiB
C
/*
|
|
grbl.h - main Grbl include file
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2015-2016 Sungeun K. Jeon for Gnea Research LLC
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef grbl_h
|
|
#define grbl_h
|
|
|
|
// Grbl versioning system
|
|
#define GRBL_VERSION "1.1b"
|
|
#define GRBL_VERSION_BUILD "20160926"
|
|
|
|
// Define standard libraries used by Grbl.
|
|
#include <avr/io.h>
|
|
#include <avr/pgmspace.h>
|
|
#include <avr/interrupt.h>
|
|
#include <avr/wdt.h>
|
|
#include <util/delay.h>
|
|
#include <math.h>
|
|
#include <inttypes.h>
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
// Define the Grbl system include files. NOTE: Do not alter organization.
|
|
#include "config.h"
|
|
#include "nuts_bolts.h"
|
|
#include "settings.h"
|
|
#include "system.h"
|
|
#include "defaults.h"
|
|
#include "cpu_map.h"
|
|
#include "planner.h"
|
|
#include "coolant_control.h"
|
|
#include "eeprom.h"
|
|
#include "gcode.h"
|
|
#include "limits.h"
|
|
#include "motion_control.h"
|
|
#include "planner.h"
|
|
#include "print.h"
|
|
#include "probe.h"
|
|
#include "protocol.h"
|
|
#include "report.h"
|
|
#include "serial.h"
|
|
#include "spindle_control.h"
|
|
#include "stepper.h"
|
|
#include "jog.h"
|
|
|
|
#endif
|