332acada88
[new] Altered the way default settings are stored and restored. Saved about 300 bytes(!) of flashed size. Should free up enough for certain configurations of CoreXY machines. [fix] When the optional M7 mist coolant IO was enabled, coolant overrides was not disabling correctly. [fix] Coolant override states was not restored correctly after a parking motion in certain situations. It would restore programmed state, rather than current overridden state. [fix] Now allow coolant overrides to operate during jogging motion. [fix] Invert control pin mask typo. [new] Added a new build info feedback mechanism for enabling the safety door input pin.
22 lines
No EOL
860 B
CSV
22 lines
No EOL
860 B
CSV
OPT: Code, Build-Option Description,State
|
|
V,Variable spindle,Enabled
|
|
N,Line numbers,Enabled
|
|
M,Mist coolant M7,Enabled
|
|
C,CoreXY,Enabled
|
|
P,Parking motion,Enabled
|
|
Z,Homing force origin,Enabled
|
|
H,Homing single axis commands,Enabled
|
|
T,Two limit switches on axis,Enabled
|
|
A,Allow feed rate overrides in probe cycles,Enabled
|
|
D,Use spindle direction as enable pin,Enabled
|
|
0,Spindle enable off when speed is zero,Enabled
|
|
S,Software limit pin debouncing,Enabled
|
|
R,Parking override control,Enabled
|
|
+,Safety door input pin,Enabled
|
|
*,Restore all EEPROM command,Disabled
|
|
$,Restore EEPROM `$` settings command,Disabled
|
|
#,Restore EEPROM parameter data command,Disabled
|
|
I,Build info write user string command,Disabled
|
|
E,Force sync upon EEPROM write,Disabled
|
|
W,Force sync upon work coordinate offset change,Disabled
|
|
L,Homing initialization auto-lock,Disabled |