2006-06-22 03:28:57 +02:00
|
|
|
#include "asm.h"
|
2011-07-29 13:31:27 +02:00
|
|
|
#include "memlayout.h"
|
2011-08-08 19:30:08 +02:00
|
|
|
#include "mmu.h"
|
|
|
|
|
|
2008-08-28 02:52:05 +02:00
|
|
|
# Each non-boot CPU ("AP") is started up in response to a STARTUP
|
|
|
|
|
# IPI from the boot CPU. Section B.4.2 of the Multi-Processor
|
|
|
|
|
# Specification says that the AP will start in real mode with CS:IP
|
|
|
|
|
# set to XY00:0000, where XY is an 8-bit value sent with the
|
|
|
|
|
# STARTUP. Thus this code must start at a 4096-byte boundary.
|
2006-09-06 21:08:14 +02:00
|
|
|
#
|
2008-08-28 02:52:05 +02:00
|
|
|
# Because this code sets DS to zero, it must sit
|
|
|
|
|
# at an address in the low 2^16 bytes.
|
|
|
|
|
#
|
2011-09-04 21:56:16 +02:00
|
|
|
# Startothers (in main.c) sends the STARTUPs one at a time.
|
2011-09-01 16:25:20 +02:00
|
|
|
# It copies this code (start) at 0x7000. It puts the address of
|
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.
A summary of the changes is as follows:
- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files. And, we don't
care anymore about booting.
- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!
- Update gdb.tmpl to be for i386 or x86-64
- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
(32-bit)
- Update elfhdr to be 64 bit
- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)
- exec.c: fix passing argv (64-bit now instead of 32-bit).
- initcode.c: use syscall instead of int.
- kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of
address space!
- proc.c: initial return is through new syscall path instead of trapret.
- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.
- swtch: simplify for x86-64 calling conventions.
- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.
- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.
- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.
- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).
- types.h: add uint64, and change pde_t to uint64
- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit
- vectors: update to make them 64 bits
- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).
- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.
TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 14:24:42 +02:00
|
|
|
# a newly allocated per-core stack in start-12,the address of the
|
|
|
|
|
# place to jump to (apstart32) in start-4, and the physical address
|
2011-09-04 21:56:16 +02:00
|
|
|
# of entrypgdir in start-12.
|
2006-06-22 03:28:57 +02:00
|
|
|
|
2010-09-13 21:34:44 +02:00
|
|
|
.code16
|
2006-06-22 03:28:57 +02:00
|
|
|
.globl start
|
2006-09-06 19:04:06 +02:00
|
|
|
start:
|
2010-09-13 21:34:44 +02:00
|
|
|
cli
|
2006-06-22 03:28:57 +02:00
|
|
|
|
2016-08-10 17:35:28 +02:00
|
|
|
# Zero data segment registers DS, ES, and SS.
|
2010-09-13 21:34:44 +02:00
|
|
|
xorw %ax,%ax
|
|
|
|
|
movw %ax,%ds
|
|
|
|
|
movw %ax,%es
|
|
|
|
|
movw %ax,%ss
|
2006-06-22 03:28:57 +02:00
|
|
|
|
2016-08-10 17:35:28 +02:00
|
|
|
# Switch from real to protected mode. Use a bootstrap GDT that makes
|
|
|
|
|
# virtual addresses map directly to physical addresses so that the
|
|
|
|
|
# effective memory map doesn't change during the transition.
|
2007-08-24 21:25:52 +02:00
|
|
|
lgdt gdtdesc
|
|
|
|
|
movl %cr0, %eax
|
2009-07-12 04:15:32 +02:00
|
|
|
orl $CR0_PE, %eax
|
2007-08-24 21:25:52 +02:00
|
|
|
movl %eax, %cr0
|
2006-09-06 21:08:14 +02:00
|
|
|
|
2016-08-10 17:35:28 +02:00
|
|
|
# Complete the transition to 32-bit protected mode by using a long jmp
|
|
|
|
|
# to reload %cs and %eip. The segment descriptors are set up with no
|
|
|
|
|
# translation, so that the mapping is still the identity mapping.
|
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.
A summary of the changes is as follows:
- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files. And, we don't
care anymore about booting.
- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!
- Update gdb.tmpl to be for i386 or x86-64
- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
(32-bit)
- Update elfhdr to be 64 bit
- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)
- exec.c: fix passing argv (64-bit now instead of 32-bit).
- initcode.c: use syscall instead of int.
- kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of
address space!
- proc.c: initial return is through new syscall path instead of trapret.
- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.
- swtch: simplify for x86-64 calling conventions.
- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.
- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.
- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.
- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).
- types.h: add uint64, and change pde_t to uint64
- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit
- vectors: update to make them 64 bits
- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).
- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.
TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 14:24:42 +02:00
|
|
|
ljmpl $(KCSEG32), $start32
|
2006-09-06 19:04:06 +02:00
|
|
|
|
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.
A summary of the changes is as follows:
- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files. And, we don't
care anymore about booting.
- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!
- Update gdb.tmpl to be for i386 or x86-64
- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
(32-bit)
- Update elfhdr to be 64 bit
- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)
- exec.c: fix passing argv (64-bit now instead of 32-bit).
- initcode.c: use syscall instead of int.
- kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of
address space!
- proc.c: initial return is through new syscall path instead of trapret.
- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.
- swtch: simplify for x86-64 calling conventions.
- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.
- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.
- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.
- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).
- types.h: add uint64, and change pde_t to uint64
- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit
- vectors: update to make them 64 bits
- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).
- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.
TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 14:24:42 +02:00
|
|
|
.code32
|
2009-08-08 10:07:30 +02:00
|
|
|
start32:
|
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.
A summary of the changes is as follows:
- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files. And, we don't
care anymore about booting.
- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!
- Update gdb.tmpl to be for i386 or x86-64
- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
(32-bit)
- Update elfhdr to be 64 bit
- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)
- exec.c: fix passing argv (64-bit now instead of 32-bit).
- initcode.c: use syscall instead of int.
- kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of
address space!
- proc.c: initial return is through new syscall path instead of trapret.
- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.
- swtch: simplify for x86-64 calling conventions.
- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.
- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.
- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.
- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).
- types.h: add uint64, and change pde_t to uint64
- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit
- vectors: update to make them 64 bits
- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).
- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.
TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 14:24:42 +02:00
|
|
|
movl $start-12, %esp
|
|
|
|
|
movl start-4, %ecx
|
|
|
|
|
jmp *%ecx
|
2010-09-13 21:34:44 +02:00
|
|
|
|
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.
A summary of the changes is as follows:
- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files. And, we don't
care anymore about booting.
- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!
- Update gdb.tmpl to be for i386 or x86-64
- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
(32-bit)
- Update elfhdr to be 64 bit
- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)
- exec.c: fix passing argv (64-bit now instead of 32-bit).
- initcode.c: use syscall instead of int.
- kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of
address space!
- proc.c: initial return is through new syscall path instead of trapret.
- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.
- swtch: simplify for x86-64 calling conventions.
- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.
- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.
- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.
- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).
- types.h: add uint64, and change pde_t to uint64
- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit
- vectors: update to make them 64 bits
- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).
- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.
TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 14:24:42 +02:00
|
|
|
.align 4
|
2006-06-22 03:28:57 +02:00
|
|
|
gdt:
|
2010-09-13 21:34:44 +02:00
|
|
|
SEG_NULLASM
|
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.
A summary of the changes is as follows:
- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files. And, we don't
care anymore about booting.
- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!
- Update gdb.tmpl to be for i386 or x86-64
- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
(32-bit)
- Update elfhdr to be 64 bit
- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)
- exec.c: fix passing argv (64-bit now instead of 32-bit).
- initcode.c: use syscall instead of int.
- kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of
address space!
- proc.c: initial return is through new syscall path instead of trapret.
- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.
- swtch: simplify for x86-64 calling conventions.
- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.
- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.
- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.
- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).
- types.h: add uint64, and change pde_t to uint64
- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit
- vectors: update to make them 64 bits
- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).
- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.
TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 14:24:42 +02:00
|
|
|
SEG_ASM(0xa, 0, 0xffffffff)
|
|
|
|
|
SEG_ASM(0x2, 0, 0xffffffff)
|
2006-09-06 19:27:19 +02:00
|
|
|
|
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.
A summary of the changes is as follows:
- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files. And, we don't
care anymore about booting.
- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!
- Update gdb.tmpl to be for i386 or x86-64
- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
(32-bit)
- Update elfhdr to be 64 bit
- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)
- exec.c: fix passing argv (64-bit now instead of 32-bit).
- initcode.c: use syscall instead of int.
- kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of
address space!
- proc.c: initial return is through new syscall path instead of trapret.
- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.
- swtch: simplify for x86-64 calling conventions.
- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.
- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.
- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.
- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).
- types.h: add uint64, and change pde_t to uint64
- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit
- vectors: update to make them 64 bits
- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).
- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.
TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 14:24:42 +02:00
|
|
|
.align 16
|
2006-06-22 03:28:57 +02:00
|
|
|
gdtdesc:
|
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.
A summary of the changes is as follows:
- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files. And, we don't
care anymore about booting.
- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!
- Update gdb.tmpl to be for i386 or x86-64
- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
(32-bit)
- Update elfhdr to be 64 bit
- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)
- exec.c: fix passing argv (64-bit now instead of 32-bit).
- initcode.c: use syscall instead of int.
- kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of
address space!
- proc.c: initial return is through new syscall path instead of trapret.
- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.
- swtch: simplify for x86-64 calling conventions.
- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.
- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.
- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.
- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).
- types.h: add uint64, and change pde_t to uint64
- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit
- vectors: update to make them 64 bits
- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).
- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.
TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 14:24:42 +02:00
|
|
|
.word 0x17 # sizeof(gdt)-1
|
2010-09-13 21:34:44 +02:00
|
|
|
.long gdt
|
2011-08-11 18:25:10 +02:00
|
|
|
|